Generator NUSonic DG1x

The generator is the heart of every NUCLEUS ultrasonic welding machine. The NUSonic DG1x works without a classic resonant circuit – so it runs any frequency from 17 to 70 kHz with one and the same unit.

  • Any frequency from 17 to 70 kHz, continuously
  • No classic resonant circuit
  • Power classes 1000, 1700 and 3500 W
  • Wide-range power supply 90–280 V, 50/60 Hz
  • Freely configurable state controllers
  • Fieldbus interfaces without additional modules
NUSonic DG1x ultrasonic generator for every frequency from 17 to 70 kHz

One generator for every frequency

Classic ultrasonic generators work with a resonant circuit that is tuned to one fixed frequency. If you weld at 20 kHz and at 35 kHz, you therefore need two different generators – and another one for every further frequency.

The NUSonic DG1x does without a classic resonant circuit. Thanks to our UltraWide technology, it runs any frequency between 17 and 70 kHz continuously – no other ultrasonic generator can do this.

  • One generator type for everything: roll seam, press or custom system, 20 or 35 kHz – the same generator works everywhere.
  • Combine tools freely: converters and sonotrodes of different frequencies can be used on the same machine.
  • Fewer spare parts: one spare generator fits all machines.

Control to measure

Internal state controllers in the generator can be configured freely for your application. The control behaviour adapts precisely to material, tool and process – for consistent seams, even when conditions change.

For roll seam and press

The DG1x performs convincingly both in the cyclic operation of ultrasonic presses and in the continuous operation of roll seam systems, where the ultrasound is used permanently and without interruption.

Developed specifically for these high continuous loads, the DG1x offers maximum reliability even under demanding conditions – without compromising on classic, static ultrasonic applications. This sets it apart from many generators on the market, which are designed primarily for cyclic operation.

With three power classes of 1,000, 1,700 and 3,500 watts, the DG1x offers the right solution for every application – from a single ultrasonic workstation to a fully automated production line.

With its wide-range power supply (90–280 V, 50/60 Hz), the generator works at full power on any mains supply in the world.

NuSonic configuration software

With our NuSonic configuration software you configure and analyse one or several generators. All relevant measured values can be tracked in real time and displayed at high resolution – this makes quality control and the tuning of your application easier. The tool runs on Windows, Linux and macOS.

Matched to converter and sonotrode

We develop and build generators, converters and sonotrodes ourselves. Because all components are matched to each other, the quality of the weld seams stays consistent. We are happy to discuss which generator suits your application – get in touch with us.

Product highlights

01

MultiHead-Sync

The new NUCLEUS MultiHead-Sync makes it possible to synchronise several generators with highest precision. This enables the use of a multi-converter system in which one sonotrode is excited by multiple converters.

02

Analysis

All NUCLEUS generators are equipped as standard with an analysis network port. All data can thus be evaluated simultaneously with the bus operation.

03

Connectivity

Various analogue and digital IO ports are standard equipment. They ensure an easy and permanent comparison between target values and actual values.

Everything under control – Generator NUSonic DG1x
04

Everything under control

All NUCLEUS generators are equipped with a full-colour OLED screen displaying all important information clearly at a glance.

05

Fieldbus right at the generator

All NUCLEUS generators are optionally available with PROFINET, Ethernet TCP/UDP, EtherCAT, EtherNet/IP, Modbus TCP and Modbus UDP interfaces. The preferred bus interface can be activated conveniently via the NuSonic configuration software, without requiring any additional modules.

06

Legacy connections

In addition to the modern Ethernet-based interfaces, NUCLEUS DG1x generators can be connected via classic interfaces with optional modules. These include RS232, RS485, Profibus and CAN bus (CANopen).

Technical data

Width / height / depth91 / 263 / 279 mm
Frequency17 to 70 kHz (continuous – no steps)
Power3 power classes: 1000, 1700, 3500 W
Operating modesPower, time, energy
Parameter presets1024
Internal memory (64 GB)optional
Ethernet interface for fieldbus application2× 100 Mbit
Profinetoptional
Ethernet TCP / UDPalways
EtherCAToptional
EtherNet/IPoptional
Modbus TCP / UDPoptional
Analogue / digital I/O interfacealways
NuConnect Ethernet service interfacealways
SIO hub to connect NuDrive servo motorsoptional
NuSync-Connectoptional
Fieldbus interface modulesoptional
RS232optional
RS485optional
Profibusoptional
CAN bus (CANopen)optional
SSO (Safe Sonic Off) – safe switching off of the power amplifier without switching off the devicealways

Your personal sales partner

You can find our sales partners in many countries in Europe and North America. If you have any questions, please contact us or one of our sales partners. We also prepare welding samples for you.